|
Technical Parameter Of Bamboo flooring
Bamboo flooring Brief introduction
The bamboo flooring planks are machined with tongue and groove
edges to provide interlocking assembly. The ends are also end-matched
with tongue and groove. Each piece is machine sanded on top,
with rough glue-ready surface on bottom. The edge above the
tongue on the long edge is angled and ready to accept standard
flooring nails.
Each pre-finished bamboo flooring is coated with a clear, UV
cured acrylic polyurethane. State of the art machinery is used
to apply and cure the durable coating.
ABRASION RESISTANCE
Bamboo flooring tested according to ASTM C501 (H-22 Calibrated
wheels loaded with 1000 gram weight at 70 RPM for 1000 cycles)
weight loss = .349 grams = .012 ounces. The test we have done
for abrasion resistance showed that BamPlank tm finish is
one of the toughest to be found in the wood flooring industry.
According to ASTM 4060 "Taber Abrasion Test", it
took over 4,000 cycles to remove the finish coating (United
States Testing Company).
FLAMMABILITY
Bamboo flooring tested according to ASTM E648 Critical Radiant.
Panel Test. Passes with a CLASS I rating per NFPA "Life
Safety Code". This means that bamboo can be used in all
classes of buildings. (United States Testing Company).
|
 |
